EMATEST-PL – Systems for Automatic Ultrasonic Inline Examination of Plates
- Detects internal imperfections like laminations, non-metallic inclusions, porosity, shell, sponge, etc.
- Detection of surface & sub-surface defects.
- Precise wall thickness measurement accuracy: ± 0.05 mm.
- Used for surface temp. up to 600 °C
NORDISCAN-PL – Systems for Automatic Ultrasonic off-line Examination of Plates
- High performance inspections of plates outside of the production line.
- Detects internal, surface & sub-surface defects.
- Plate’s material can be carbon steel, stainless steel, aluminium, titanium, cooper, & alloys.
- Used for surface temp. up to 250 °C
EDDYSPOT – Systems for Automatic Non-Contact Detection of Hard Spots
- Detects hard spots/ bruises of hot rolling process plates.
- Thickness range can be unlimited.
- Reference Test Sensitivity: Hard Spots down to 10 x 10 mm are reliably detected.
- Used for surface temp. up to 600 °C
ALUTEST-PL – Systems for Automatic Ultrasonic Examination of Non-Ferrous Plates and Ingots
- ALUTEST-PL general configuration is similar in concept to the configuration of NORDISCAN-PL.
- Detects internal, surface, sub-surface defects & wall thickness measurement.
- Can detect the smallest defects, down to FBH 0.8 mm in slabs of up to 800 mm thickness.
GEOMETRIX-PL – Automated Laser Geometry Measurement System for Plates, Strips and Slabs
- Inspection carried directly on the process line on the existing mill roll lines with precision mechanics.
- Measurement mode is automatic and non-contact.
- Determining the width of the product with accuracy of ≤ ±1 mm (0.03”).
- Determining the maximum deviation from flatness of any type (concave, bulge, undulation, squareness), with accuracy of ≤ ±1 mm (0.03”) /m.
NKE-PCS-5000 – Plate Surface Cleaning System
- This System is intended for high speed, in-line removal of dirt, dust, scale, and other foreign particles from the top plate surface lines.
- Cleaning in fully automatic mode, at a working speed of the roller conveyor.
- Short lead times and rapid integration in the production line.
- Automatic operation and low maintenance, with minimal consumables costs
NORDISCAN-BB – Systems for Automatic UltrasonicExamination of Bars and Billets
- Detection of inner defects like shrink holes, insulation, blowholes, inclusions etc.
- Detection of surface and sub-surface defect is also possible.
- Available in 2 configuration “pass-through” (for smaller diameters.) & “gantry” (for big diameters.)
- Specially to inspect carbon steel bars & billets
ALUTEST-BB – Systems for Automatic Ultrasonic Examination of Non-Ferrous Bars
- Specially to inspect aluminium, titanium, copper, and other non-ferrous metals, bars, & billets.
- Detects internal, surface & sub-surface defects.
- Systems meets most stringent standards of the aerospace industry.
NORDISCAN-PI – Systems for Automatic Ultrasonic Examination of Pipes
- Weld Seam profiling & scarfing quality monitoring.
- Examination of pipe body & both ends.
- Examination of Weld Seam and HAZ.
- ID, OD, Mid wall & surface examination.
- Wall thickness measurement.
- For Seamless, ERW, Line Pipes (LSAW, HSAW).
NORDISCAN-RAIL – Systems for Automatic Ultrasonic Examination of Rails
- Detection of internal and surface defects in Railroad rails (like head, web, and foot).
- Complying international and local railway standards.
- Inspection speed 2m/s.
SONAFLEX – Multipurpose Test Electronics Unit.
It is a unique intelligent ultrasonic testing system with flexible hardware. It allows you to create relatively small NDT-systems or for performance of various lab tests.
- Mainly used for a specific lab and industrial applications.
- Internal, surface and sub-surface defects detection.
- Precise wall thickness measurement.
- Material properties evaluation.
